Miele Allerdry T 4464 C Instrukcje Operacyjne Pobierz pdf (Strona 43)

Connection to a sink drain outlet

The drain hose can be connected

directly to a sink drain outlet.

^ Remove the following from the back

of the dryer at the bottom:

Adapter 1 and hose clip 3 behind it.

Fit adapter 1 to the sink drain outlet

using nut 2.

If this nut has a flat disc in it you should

take the disc out first. Important: if this

nut has a washer or seal in it this must

not be removed!

Attach the end of the hose to

adapter 1.

Use a screwdriver to tighten hose

clip 3 up close to the nut.

If you no longer wish to use an

external condensed water outlet

Do not push the drain hose

back into the dryer. Doing this could

cause it to become kinked and

damaged in the dryer.

^ Loop the drain hose up.

^ Use a suitable cable tie to secure the

looped hose to the back of the dryer,

or simply lay the looped hose behind

the dryer.

^ Attach the open end of the drain

hose back onto the holder at the

back of the dryer at the top (see

holder 2 in "Pulling out the drain

hose").

Installation and connection

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

Brak uwag

Miele Allerdry T 4464 C Instrukcje Operacyjne Strona 43