Miele GAS KM 81-2 Instrukcje Operacyjne Pobierz pdf (Strona 3)

Contents

Description of the appliance 2

For your safety 5

Help protect our environment 6

Warning and Safety Instructions 7

Burner

Burner control 11

Instructions for using the gas burner 11

Power cut 12

Suitable woks, pots and pans 13

Cleaning and care 14

Problem solving guide 16

After Sales Service 17

For the installer / electrician / engineer

@>® Electrical connection 18

@>CND

Electrical connection 19

@>® Gas connection 20

@® Gas connection 22

Appliance dimensions 23

@<@> Instructions for building-in 25

(AU|)(ND

Clearance above and around the appliance 28

<@>® Installation 30

(JUSXND

Instructions for building-in 32

(CDN)(£SA) conversion to alternative types of gas 33

(AU|)(NZ) Conversion to alternative types of gas 37

For your safety

WARNING: If the information in

this manual is not followed

exactly, a fire or explosion may

result causing property damage,

personal injury or death.

Do not store or use gasoline or other

flammable vapors and liquids

in

the

vicinity of this or any other

ap-

pliance.

WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance.

- Do not touch any electrical

switch;

do not use any phone in

your building.

- Immediately call your gas sup-

plier from a neighbor's phone.

Follow the gas supplier's instruc-

tions.

- If you cannot reach your gas sup-

plier, call the fire department.

Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

Note to the installer (CDN and USA)

LEAVE THESE INSTRUCTIONS

WITH THE CONSUMER.

The appliance and its individual shutoff

valve must be disconnected from the gas

supply piping system during any pressure

testing of that system at test pressures in

excess of 1/2 psi (3.5 kPa).

The appliance must be isolated from the

gas supply piping system by closing its

individual manual shutoff valve during

any pressure testing of the gas supply

piping system at test pressures equal to

or less than 1/2 psi (3.5 kPa).

For Canada only:

The minimum supply pressure for

checking the regulator setting shall be

5 inches water column (1246 Pa),

which is

1

inch water column (249 Pa)

above the manifold pressure of 4 in-

ches water column (996 Pa).

Instructions for replacement of fixed

ori-

fices are shown on page 32. Save the

orifices removed from the appliance for

future use.

5

1 2 3 4 5 6 7 8 ... 20 21

Komentarze do niniejszej Instrukcji

Brak uwag