Miele KM2357 Instrukcja Obsługi

Przeglądaj online lub pobierz Instrukcja Obsługi dla Płyty grzewcze Miele KM2357. Miele KM2357 hob Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1 - Gas hobs

Operating and installation instructionsGas hobsKM 2356KM 2357To avoid the risk of accidentsor damage to the appliance it isessential to read theseinst

Strona 2

Safety with children~This appliance is not a toy! To prevent the risk of injury, do notallow children to play with it or use the controls. Please supe

Strona 3

Technical safety~Before installation, check the appliance for visible signs ofdamage. Do not install and use a damaged appliance. It could bedangerous

Strona 4 - Contents

~Never open the outer casing of the appliance. Tampering withelectrical connections or components and mechanical parts ishighly dangerous to the user

Strona 5

~In areas which may be subject to infestation by cockroaches orother vermin, pay particular attention to keeping the appliance andits surroundings in

Strona 6 - Guide to the appliance

~Do not use the appliance as a resting place for anything else. Thearticle could melt or catch fire if residual heat is still present or if theapplian

Strona 7

~Remove splashes of fat and other food debris from the surface assoon as possible. These are a fire hazard.~Replace the pan supports carefully to avoi

Strona 8

~If the appliance is installed behind a kitchen furniture door, it mayonly be used with the furniture door open.Only close the door if the appliance i

Strona 9 - Correct application

Disposal of the packingmaterialThe transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and

Strona 10 - Safety with children

Please stick the extra data plate for the appliance suppliedwith this documentation in the space provided in the "Aftersales service, data plate&

Strona 11 - Technical safety

Rapid ignition systemThe appliance has a rapid ignition system with the followingfeatures:–Rapid ignition without pressing and holding the control dia

Strona 12

G This appliance can be used in countries other than those specified on theappliance. It is, however, set up for connection to the gas and electricity

Strona 13 - Correct use

Switching onWhen using the gas hob an extractor hood or a ventilationfacility must be used.^The control for the burner required must be pressed in and

Strona 14

Regulating the flameRegulate the flame so that it does not spread out beyond thesides of the pan. As the outer part of the flame is much hotterthan th

Strona 15

Burner Min. pan base diameter in cmSmallMediumLargeWok10101215Max. diameter at top of pan in cmWithout WithCombi insertSmallMediumLargeWok22222426---3

Strona 16

Wok ringThe Wok ring supplied with your appliance can be used ininstances where extra stability is required. It is particularlysuitable for Woks with

Strona 17 - Caring for the environment

–Use a pan lid whenever possible to minimise heat loss.–Cook with as little water as possible.–Cooking times are greatly reduced when using a pressure

Strona 18 - Cleaning for the first time

Thermo-electric ignition safety deviceThis appliance is has a thermo-electric ignition safety device.If the flame goes out, for example if food has bo

Strona 19 - Operation

,Do not use a steam cleaning appliance to clean thisappliance. The steam could reach electrical componentsand cause a short circuit.–The appliance sho

Strona 20

Cleaning NotesStainless steelsurfacesClean stainless steel surfaces using an E-Cloth(see "Optional accessories") or with a solutionof warm w

Strona 21

To assemble the small, medium and large burners^ Place the burner head b on to the burner base e so thatthe ignition safety device d and the ignitor c

Strona 22

To assemble the wok burner^ Place burner head c onto burner base d so that theignition safety device e and the ignitor f extend throughtheir respectiv

Strona 23

Gas-heated appliancesSafety precautions to take if you smell gasß Turn off the gas emergency control valve immediately.This is usually located near th

Strona 24 - Energy saving tips

With the help of the following notes, minor faults in the performance of theappliance, some of which may result from incorrect operation can be put ri

Strona 25 - Safety features

Problem Possible cause RemedyIf there is a power cutduring operationTurn all the controls clockwise to the "ß"position. You can then operate

Strona 26 - Cleaning and care

Miele offer a comprehensive range of useful accessories aswell as cleaning and conditioning products for yourappliance.These products can be ordered o

Strona 27

Fit the wall units and extractor hoodbefore fitting the appliance to avoiddamaging the surface.~The veneer or laminate coatings ofworktops (or adjacen

Strona 28

Safety distance above the hobA minimum safety distance must bemaintained between the hob and thecooker hood above it. See the cookerhood manufacturer&

Strona 29

Safety distances to the sides andback of the hobIdeally the hob should be installed withplenty of space on either side. Theremay be a wall at the rear

Strona 30 - Problem solving guide

Building-in dimensionsa Frontb Casing depthc Gas connection R 1/2 - ISO 7-1 (DIN 10226)d Mains connection box with mains connection cable, L = 2,000mm

Strona 31

Installation^Make the worktop cut-out as shownin "Building-in dimensions".Remember to maintain the minimumsafety distances (see "Safety

Strona 32 - Optional accessories

Seal between appliance andworktopThe sealing strip under the edge of thetop part of the appliance provides asufficient seal for the worktop.The applia

Strona 33

Building-in dimensionsa Frontb Casing depthc Gas connectionR 1/2 - ISO 7-1 (DIN EN 10226)d Electrical connection cablee Electronics housingMax. buildi

Strona 34

Guide to the appliance ...6Warning and Safety instructions ...9Caring for

Strona 35

Flush fit gas hobs are only suitablefor installation in granite, marble,tiled or solid wood worktops. Whenusing a worktop made from anyother material,

Strona 36 - Building-in dimensions

InstallationGranite and marble worktopsa Worktopb Hobc GapAs the ceramic glass and theworktop cut-out have a certaindimensional tolerance, the size of

Strona 37 - Installation

Solid wood and tiled worktopsa Worktopb Hobc Gapd Wooden frame 7 mm(to be provided on site)As the ceramic glass and theworktop cut-out have a certaind

Strona 38 - Tiled worktop

Building into a stainless steel worktopThis appliance can be welded into a stainless steel worktop. It is essential thatafter being welded, it is stil

Strona 39

Secure the appliance as shown, usingthe fixings supplied.20 mm worktop30 mm worktop40 mm worktopAfter installationCheck that all the burners are opera

Strona 40

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regula

Strona 41

ImportantThe electrical safety of this appliancecan only be guaranteed if correctlyearthed. It is most important that thisbasic safety requirement is

Strona 42

,Connection to the gas supply, orconversion from one type of gas toanother, should only be undertakenby an approved and registered gasinstaller in str

Strona 43

ConnectionThe gas connection must be installedso that connection can be made eitherfrom inside or outside the kitchen unit,and the isolating valve mus

Strona 44 - Securing the appliance

Nominal ratingBurner Gas type High setting Low settingkW g/h kWSmall burner Natural gas HLiquid gas1.001.00-0.730.270.21Medium burner Natural gas HLiq

Strona 45 - Electrical connection

KM 2357 ...39Building-in dimensions ...39Installation .

Strona 46

,Connection to the gas supply, or conversion from onetype of gas to another, should only be undertaken by anapproved and registered gas installer in s

Strona 47 - Gas connection

Changing the jetsDisconnect the gas hob from themains electricity supply. Turn off thegas supply.To change the main jetsSmall, medium and large burner

Strona 48

Wok burner^ Remove burner cap ab and burnerhead c.^Using an M7 socket spanner,unscrew the main jet d^Fit the correct jets securely (see jettable).^Fin

Strona 49 - Burner ratings

To change the small jetsTo change the small jets, the burnersecuring screws must first be loosenedand the upper section of the applianceremoved.^Pull

Strona 50 - Jet table

Function testCheck all gas fittings for leaks.^Reassemble the appliance.^Check the burner flame by operatingthe burner.The flame must not go out on th

Strona 51 - To change the main jets

In the event of any faults which you cannot remedy yourself, or if the appliance isunder guarantee, please contact:–Your Miele dealer, or–the Miele Se

Strona 52

Alteration rights reserved / 2112M.-Nr. 09 370 470 / 01

Strona 53 - To change the small jets

Hoba Small burnerb Large burnerc Wok burnerd Medium burnere Medium burnerf Pan support (in three sections)Controls:g Front lefth Back lefti Middlej Ba

Strona 54 - Function test

BurnersWok burnera Outer burner capb Inner burner capc Burner headd Burner basee Ignition safety devicef IgnitorSmall, medium and large burnersa Burne

Strona 55 - Guarantee

Accessories suppliedThe accessories supplied with your appliance as well as arange of optional ones are available to order from Miele (see"Option

Strona 56 - M.-Nr. 09 370 470 / 01

This appliance complies with all relevant local and national safetyrequirements. Improper use of the appliance can, however,present a risk of both per

Komentarze do niniejszej Instrukcji

Brak uwag